Where performance meets value

It's no wonder why SummaCut is one of the most popular series of vinyl cutters ever built. By combining world renowned craftsmanship with real-world affordability, Summa managed to create a top-of-the-line cutter series that tops all other competitors.

Features

Powerful technology at an affordable price

Legendary Tracking

The large, easy-to-use control panel allows the operator to quickly change the speed, pressure, plot mode and other settings, perform test cuts, and much more.

touchscreen

Optical Positioning System

OPOS-X contour cutting alignment enables you to die-cut valuable printed vinyl graphics with complete confidence and ease.


High-speed Cutting Head

The newly designed high-speed cutting head features incredible accuracy for reliable and effortless vinyl cutting.

Intelligent Media System

Integrated media rollers and roll end flanges load vinyl straight and keep media on track, even when cutting at top speed.

Models

Choose the right size for the job.

SummaCut Series
SummaCut Series
SummaCut FX Series
SummaCut FX Series
SummaCut D60
24 inch (60 cm) vinyl and contour cutting
SummaCut D60
24 inch
(60 cm)
SummaCut D75
29 inch (75 cm) vinyl and contour cutting
SummaCut D75
29 inch
(75 cm)
SummaCut D120
48 in (120 cm) vinyl and contour cutting
SummaCut D120
48 inch
(120 cm)
SummaCut D140
54 in (137 cm) vinyl and contour cutting
SummaCut D140
54 inch
(137 cm)
SummaCut D160
64 in (160 cm) vinyl and contour cutting
SummaCut D160
64 inch
(160 cm)

Specifications SummaCut Series

ModelsD60 LogoD75 LogoD120 LogoD140 LogoD160 Logo
Cutting TypeDrag knife with TurboCut and Tangential Emulation Modes
Tool CompatibilityBlade, Pen, Pounce Tool
Cutting Width23 inch (60 cm)29 inch (74 cm)47 inch (120 cm)53 inch (135 cm)62 inch (158 cm)
Cutting SpeedAll SummaCut models cut at speeds up to 44 inches per second (113 cps) diagonal
Axial SpeedUp to 2 G
Alignment Type
  • OPOS X
  • Barcode job recognition
  • Up to 2 x 64 marks on the X-line
  • Y-Line compensation
Maximum accelerationUp to 3 G diagonal
Tracking PerformanceWithin ± 0.004 in. (± 0.1 mm) on plots up to 26 ft. long (8 m) on rolls up to 760 mm wide
Within ± 0.004 in. (± 0.1mm) on plots up to 13 ft. (4 m) long on rolls over 760 mm wide
Cutting force0-400 grams of down-force, in 5 gram increments
Replot Memory4 MB (buffer size: 16 MB)
Display LanguagesEnglish; French; German; Dutch; Italian; Spanish; Polish; Lithuanian
ConnectivityUSB, Serial RS232, Ethernet (only on SummaCut D120, D140 - not FX - & D160)
Power Requirements100-120 / 220-240 VAC, 50/60 Hz, 85 VA maximum
Dimensions39 (W) x 13.8 (D) x 11 (H) in. (100 (W) x 35 (D) x 30 (H) cm)45 (W) x 13 (D) x 11 (H) in. (115 (W) x 35 (D) x 30 (H) cm)63 (W) x 26.8 (D) x 45 (H) in. (160 (W) x 68 (D) x 114.5 (H) cm)68 (W) x 26 (D) x 45 (H) in. (175 (W) x 68 (D) x 114.5 (H) cm)77 (W) x 26 (D) x 45 (H) in. (198 (W) x 68 (D) x 114.5 (H) cm)
weight33 lbs (15 kg)37 lbs (17 kg)92 lbs (42 kg)106 lbs (48 kg)119 lbs (54 kg)
Operating Temperature59˚ to 95˚F (15˚ to 35˚C)
Standard AccessoriesWinPlot or MacSign Cut Software, CutterControl Parameter Software, CD w/ Manuals and Drivers, Quick Start Guide, Power Cable, USB Cable, Media Guide Flanges (set of 2), 1 Spare Fuse, Standard 36˚ Blade Holder, 2 Standard 36˚ Blades, Cut-off Knife (Manual Slitter), 2 Cut-off Razor Blades.
Optional Accessories Stand or Basket for SummaCut D60 / SummaCut D75
Support

SummaCut Support

  • - Product registration
  • - Firmware/Software
  • - User Manuals
  Go to Support Support